Maintenance Imprimantes et traceurs EPSON Stylus Pro

Qu'il s'agisse de la gamme Epson SureColor ou Stylus Pro, nos techniciens agréés sont là pour vous aider à en assurer la maintenance et le dépannage.

Formulaire de maintenance imprimante


  • Cliquez sur le bouton ci-dessus.
  • Complétez le formulaire de maintenance.
  • Un technicien Graphic-Réseau vous contactera dans les plus brefs délais.
Nous pouvons intervenir sur toutes les imprimantes & traceurs EPSON.
A titre d'information, voici quelques exemples de codes erreurs sur 3 modèles d'imprimantes Epson de génération Stylus Pro (liste non exhaustive)

Vous pouvez également voir des exemples des
  • codes erreurs sur EPSON SureColor SC-S
  • |
  • codes erreurs sur EPSON SureColor Série T
  • |
  • codes erreurs sur EPSON SureColor Série F
  • |
  • codes erreurs sur EPSON SureColor Série P


  • Epson 4900

    Stylus Pro 4900 : codes d'erreur

    MAINTENANCE REQuest errors

    MAINTENANCE REQ 0002 : CR scan pass counter has come near the specified life.
    MAINTENANCE REQ 0008 : The RTC backup battery becomes exhausted
    MAINTENANCE REQ 0010 : Communication with the AID Board is not established.
    MAINTENANCE REQ 0040 : The pump counter has come near the specified life.
    MAINTENANCE REQ 0080 : The date has not been set
    MAINTENANCE REQ 0800 : Cartridge holder diaphragm near end of life
    MAINTENANCE REQ 1000 : Ink Selector near end of life
    MAINTENANCE REQ 4000 : It detects twice in a row that all the nozzles are clogging.
    MAINTENANCE REQ 0088 : RTC backup battery exhausted and date not set.

    SERVICE REQuest errors

    SERVICE REQ 1101 : CR life error
    SERVICE REQ 1125 : CR HP detection error
    SERVICE REQ 1138 : Over current error
    SERVICE REQ 113A : Overload error
    SERVICE REQ 113B : Over speed error
    SERVICE REQ 113C : Reversing error
    SERVICE REQ 113D : Driving time-out error
    SERVICE REQ 113E : Velocity deviation error
    SERVICE REQ 113F : Lock error
    SERVICE REQ 122A : Overload error
    SERVICE REQ 122B : Over speed error
    SERVICE REQ 122C : Reversing error
    SERVICE REQ 122D : Driving time-out error
    SERVICE REQ 122E : Velocity deviation error
    SERVICE REQ 122F : Lock error
    SERVICE REQ 131B : Head driver (transmission gate) overheat error
    SERVICE REQ 1412 : Motor Life error
    SERVICE REQ 141A : Overload error
    SERVICE REQ 141B : Over speed error
    SERVICE REQ 141C : Reversing error
    SERVICE REQ 141D : Driving time-out error
    SERVICE REQ 141E : Velocity deviation error
    SERVICE REQ 141F : Lock error
    SERVICE REQ 1431 : Ink selector life error
    SERVICE REQ 1432 : IC Holder life error
    SERVICE REQ 1433 : IS Unit position sensor error
    SERVICE REQ 1494 : Ink selector error
    SERVICE REQ 1496 : Ink selector sensor error detection
    SERVICE REQ 1497 : Switching time-out error
    SERVICE REQ 149D : Driving time-out error
    SERVICE REQ 150C : PG phase detection error
    SERVICE REQ 151A : Overload error
    SERVICE REQ 151B : Over speed error
    SERVICE REQ 151C : Reversing error
    SERVICE REQ 151D : Driving time-out error
    SERVICE REQ 151E : Velocity deviation error
    SERVICE REQ 151F : Lock error
    SERVICE REQ 1520 : Roll feed motor lock retry error
    SERVICE REQ 1521 : Roll feed sensor detect error
    SERVICE REQ 1523 : Roll sensor error
    SERVICE REQ 151A : Overload error
    SERVICE REQ 151B : Over speed error
    SERVICE REQ 151C : Reversing error
    SERVICE REQ 152D : Driving time-out error
    SERVICE REQ 152E : Velocity deviation error
    SERVICE REQ 152F : Lock error
    SERVICE REQ 1530 : HP detection error
    SERVICE REQ 1531 : Release Sensor error
    SERVICE REQ 153A : Overload error
    SERVICE REQ 153B : Over speed error
    SERVICE REQ 153C : Reversing error
    SERVICE REQ 153D : Driving time-out error
    SERVICE REQ 153E : Velocity deviation error
    SERVICE REQ 153F : Lock error
    SERVICE REQ 1540 : Cutter HP detection error
    SERVICE REQ 1541 : Cutter return error
    SERVICE REQ 1549 : Motor disconnection error
    SERVICE REQ 154A : Overload error
    SERVICE REQ 154B : Cutter Motor over speed error
    SERVICE REQ 154C : Cutter Motor reversing error
    SERVICE REQ 154D : Driving time-out error
    SERVICE REQ 154E : Velocity deviation error
    SERVICE REQ 154F : Lock error
    SERVICE REQ 1551 : Paper thickness determining error
    SERVICE REQ 155A : DCP Motor overload error
    SERVICE REQ 155B : DCP Motor over speed error
    SERVICE REQ 155C : DCP Motor reversing error
    SERVICE REQ 155D : DCP Motor driving time-out error
    SERVICE REQ 155E : DCP Motor velocity deviation error
    SERVICE REQ 155F : DCP Motor lock error
    SERVICE REQ 1561 : Paper thickness at power-on error
    SERVICE REQ 1562 : ASF Motor abnormal load detection error
    SERVICE REQ 156A : ASF Motor overload error
    SERVICE REQ 156B : ASF Motor over speed error
    SERVICE REQ 156C : ASF Motor reversing error
    SERVICE REQ 156D : ASF Motor driving time-out error
    SERVICE REQ 156E : ASF Motor velocity deviation error
    SERVICE REQ 156F : ASF Motor lock error
    SERVICE REQ 1571 : ASF Retard Roller Sensor operation error
    SERVICE REQ 1572 : ASF Pickup Roller operation error
    SERVICE REQ 1573 : ASF Assist Roller operation error
    SERVICE REQ 157A : ASF Sub Motor overload error
    SERVICE REQ 157B : ASF Sub Motor over speed error
    SERVICE REQ 157C : ASF Sub Motor reversing error
    SERVICE REQ 157D : ASF Sub Motor driving time-out error
    SERVICE REQ 157E : ASF Sub Motor velocity deviation error
    SERVICE REQ 157F : ASF Sub Motor lock error
    SERVICE REQ 1581 : Paper eject position error
    SERVICE REQ 1582 : ASF Edge Guide open/close error
    SERVICE REQ 158A : EG Motor overload error
    SERVICE REQ 158B : EG Motor over speed error
    SERVICE REQ 158C : EG Motor reversing error
    SERVICE REQ 158D : EG Motor driving time-out error
    SERVICE REQ 158E : EG Motor velocity deviation error
    SERVICE REQ 158F : EG Motor lock error
    SERVICE REQ 159A : ATC Motor overload error
    SERVICE REQ 159B : ATC Motor over speed error
    SERVICE REQ 159C : ATC Motor reversing error
    SERVICE REQ 159D : ATC Motor driving time-out error
    SERVICE REQ 159E : ATC Motor velocity deviation error
    SERVICE REQ 159F : ATC Motor lock error
    SERVICE REQ 1801 : AID voltage error
    SERVICE REQ 1A23 : Incorrect RTC data error
    SERVICE REQ 1A26 : RTC Access T/O error
    SERVICE REQ 1A37 : Thermistor error
    SERVICE REQ 1A38 : Transistor environmental temperature error
    SERVICE REQ 1A39 : Head error
    SERVICE REQ 1A41 : Head rank ID input error
    SERVICE REQ 1A50 : I2C Comm error (Between elements on ASIC and MAIN)
    SERVICE REQ 1A51 : I2C Comm error (Between elements on SUB and MAIN)
    SERVICE REQ 1ABX : Main Board communication error
    SERVICE REQ 1FxX : ILS error (1)
    SERVICE REQ 2000 : NVRAM error
    SERVICE REQ 2002 : SDRAM error
    SERVICE REQ 2003 : FLASH BOOT SUM CHECK error
    SERVICE REQ 200A : F/W load error
    SERVICE REQ 200D : System interrupt watchdog time-out error

    SpectroProofer errors

    01 : SpectroProofer uninstallation error
    02 : Paper Eject Support uninstallation error
    13 : Foreign material detection error in paper pressing
    14 : Paper pressing origin position detection failure error
    15 : CR HP Sensor no detection error
    16 : Paper pressing system abnormal measurement value error
    65 : Drying Fan lock detection error
    80 : ILS calibration error
    D5 : CR related drive error
    D6 : Paper pressing related operating error
     
     
    Epson 7900

    Stylus Pro 7900 : codes d'erreur

    MAINTENANCE REQuest errors

    MAINTENANCE REQ 0002 : CR scan pass counter has come near the specified life.
    MAINTENANCE REQ 0008 : The RTC backup battery becomes exhausted
    MAINTENANCE REQ 0010 : Communication with the AID Board is not established.
    MAINTENANCE REQ 0040 : The pump counter has come near the specified life.
    MAINTENANCE REQ 0080 : The date has not been set
    MAINTENANCE REQ 0800 : Cartridge waste ink pad near end of life
    MAINTENANCE REQ 1000 *1 : Ink Selector near end of life
    MAINTENANCE REQ 4000 : It detects twice in a row that all the nozzles are clogging.
    MAINTENANCE REQ 0088 : RTC backup battery exhausted and date not set.

    SERVICE REQuest errors

    SERVICE REQ 1101 : CR life error
    SERVICE REQ 1125 : CR HP detection error
    SERVICE REQ 1138 : Over current error
    SERVICE REQ 113A : Overload error
    SERVICE REQ 113B : Over speed error
    SERVICE REQ 113C : Reversing error
    SERVICE REQ 113D : Driving time-out error
    SERVICE REQ 113E : Velocity deviation error
    SERVICE REQ 113F : Lock error
    SERVICE REQ 122A : Overload error
    SERVICE REQ 122B : Over speed error
    SERVICE REQ 122C : Reversing error
    SERVICE REQ 122D : Driving time-out error
    SERVICE REQ 122E : Velocity deviation error
    SERVICE REQ 122F : Lock error
    SERVICE REQ 131B : Head driver (transmission gate) overheat error
    SERVICE REQ 13F0 : ICL operation error
    SERVICE REQ 1411 : Select error
    SERVICE REQ 1412 : Pump life error
    SERVICE REQ 1419 : Pump release error
    SERVICE REQ 141A : Overload error
    SERVICE REQ 141B : Over speed error
    SERVICE REQ 141C : Reversing error
    SERVICE REQ 141D : Driving time-out error
    SERVICE REQ 141E : Velocity deviation error
    SERVICE REQ 141F : Lock error
    SERVICE REQ 1427 : CSIC destination setting error
    SERVICE REQ 1428 : Ink holder Board Assy
    SERVICE REQ 1430 : Holder ink pad error
    SERVICE REQ 1431 : Ink selector life error
    SERVICE REQ 1434 : IC cover unlock error
    SERVICE REQ 1438 : Maintenance tank error
    SERVICE REQ 1439 : Cap error
    SERVICE REQ 143A : Overload error
    SERVICE REQ 143B : Over speed error
    SERVICE REQ 143C : Reversing error
    SERVICE REQ 143D : Driving time-out error
    SERVICE REQ 143E : Velocity deviation error
    SERVICE REQ 143F : Lock error
    SERVICE REQ 144A : Overload error
    SERVICE REQ 144B : Over speed error
    SERVICE REQ 144C : Reversing error
    SERVICE REQ 144D : Driving time-out error
    SERVICE REQ 144E : Velocity deviation error
    SERVICE REQ 144F : Lock error
    SERVICE REQ 1489 : Wiper error
    SERVICE REQ 148A : Overload error
    SERVICE REQ 148B : Over speed error
    SERVICE REQ 148C : Reversing error
    SERVICE REQ 148D : Driving time-out error
    SERVICE REQ 148E : Velocity deviation error
    SERVICE REQ 148F : Lock error
    SERVICE REQ 1494 : Ink selector error
    SERVICE REQ 1496 : Ink selector sensor error detection
    SERVICE REQ 1497 : Switching time-out error
    SERVICE REQ 149D : Driving time-out error
    SERVICE REQ 1501 : Release motor phase detection error
    SERVICE REQ 150C : PG phase detection error
    SERVICE REQ 151A : Overload error
    SERVICE REQ 151B : Over speed error
    SERVICE REQ 151C : Reversing error
    SERVICE REQ 151D : Driving time-out error
    SERVICE REQ 151E : Velocity deviation error
    SERVICE REQ 151F : Lock error
    SERVICE REQ 152A : Overload error
    SERVICE REQ 152B : Over speed error
    SERVICE REQ 152C : Reversing error
    SERVICE REQ 152D : Driving time-out error
    SERVICE REQ 152E : Velocity deviation error
    SERVICE REQ 152F : Lock error
    SERVICE REQ 1530 : Driven roller HP detection error
    SERVICE REQ 1536 : Pressurizing reset error
    SERVICE REQ 1537 : Pressurizing error
    SERVICE REQ 153A : Overload error
    SERVICE REQ 153B : Over speed error
    SERVICE REQ 153C : Reversing error
    SERVICE REQ 153D : Driving time-out error
    SERVICE REQ 153E : Velocity deviation error
    SERVICE REQ 153F : Lock error
    SERVICE REQ 1540 : Cutter HP detection error
    SERVICE REQ 1541 : Cutter return error
    SERVICE REQ 1549 : Motor disconnection error
    SERVICE REQ 154A : Overload error
    SERVICE REQ 154B : Over speed error
    SERVICE REQ 154C : Reversing error
    SERVICE REQ 154D : Driving time-out error
    SERVICE REQ 154E : Velocity deviation error
    SERVICE REQ 154F : Lock error
    SERVICE REQ 1551 : Paper thickness determining error
    SERVICE REQ 1561 : Paper thickness at power-on error
    SERVICE REQ 1800 : AID voltage error
    SERVICE REQ 1A23 : Incorrect RTC data error
    SERVICE REQ 1A26 : RTC Access T/O error
    SERVICE REQ 1A37 : Thermistor error
    SERVICE REQ 1A38 : Transistor environmental temperature error
    SERVICE REQ 1A39 : Head error
    SERVICE REQ 1A40 : IC22 error
    SERVICE REQ 1A41 : Head rank ID input error
    SERVICE REQ 1A50 : I2C Comm error (Between elements on ASIC and MAIN)
    SERVICE REQ 1A51 : I2C Comm error (Between elements on SUB and MAIN)
    SERVICE REQ 1A52 I- : 2C Comm error (Between elements on SUB-B and MAIN)
    SERVICE REQ 1A53 : I2C Comm error (Between elements on SUB-C and MAIN)
    SERVICE REQ 2000 : NVRAM error
    SERVICE REQ 2002 : SDRAM error
    SERVICE REQ 2003 : FLASH BOOT SUM CHECK error
    SERVICE REQ 200A : F/W load error
    SERVICE REQ 200D : System interrupt watchdog time-out error
    SERVICE REQ 200E : Unknown NMI
    SERVICE REQ 2010 : UART communication error
    SERVICE REQ 3000 : AC shut-off
    SERVICE REQ D131 : AID error
    SERVICE REQ FxxX : CPU-related error
    SERVICE REQ DxxX : Debug error

    Spectroproofer and Auto Take-Up error Codes

    D3 : Driving auto take-up system
    D6 : Driving paper pressing system
    65 : Cooling Fan lock detection error
    12 : Paper Pressing Plate Sensor no detection error
    13 : Foreign material detection error in paper pressing
    14 : Paper pressing origin position detection failure error
    15 : CR HP Sensor no detection error
    16 : Paper pressing system abnormal measurement value error
    17 : Take-up system abnormal measurement value error
    20 : Slack Sensor no detection error
    01 : Mechanism is not installed -(Mount Sensor is OFF)
    30 : Driving time-out error
    31 : Overload error
    32 : Over speed error
    33 : Reversing error
    34 : Velocity deviation error
    35 : Lock error
    40 : Driving time-out error
    41 : Overload error
    42 : Over speed error
    43 : Reversing error
    44 : Velocity deviation error
    45 : Lock error
    20 : Driving time-out error
     
     
    Epson 9900

    Stylus Pro 9900 : codes d'erreur

    MAINTENANCE REQuest errors

    MAINTENANCE REQ 0002 : CR scan pass counter has come near the specified life.
    MAINTENANCE REQ 0008 : The RTC backup battery becomes exhausted
    MAINTENANCE REQ 0010 : Communication with the AID Board is not established.
    MAINTENANCE REQ 0040 : The pump counter has come near the specified life.
    MAINTENANCE REQ 0080 : The date has not been set
    MAINTENANCE REQ 0800 : Cartridge waste ink pad near end of life
    MAINTENANCE REQ 1000 *1 : Ink Selector near end of life
    MAINTENANCE REQ 4000 : It detects twice in a row that all the nozzles are clogging.
    MAINTENANCE REQ 0088 : RTC backup battery exhausted and date not set.

    SERVICE REQuest errors

    SERVICE REQ 1101 : CR life error
    SERVICE REQ 1125 : CR HP detection error
    SERVICE REQ 1138 : Over current error
    SERVICE REQ 113A : Overload error
    SERVICE REQ 113B : Over speed error
    SERVICE REQ 113C : Reversing error
    SERVICE REQ 113D : Driving time-out error
    SERVICE REQ 113E : Velocity deviation error
    SERVICE REQ 113F : Lock error
    SERVICE REQ 122A : Overload error
    SERVICE REQ 122B : Over speed error
    SERVICE REQ 122C : Reversing error
    SERVICE REQ 122D : Driving time-out error
    SERVICE REQ 122E : Velocity deviation error
    SERVICE REQ 122F : Lock error
    SERVICE REQ 131B : Head driver (transmission gate) overheat error
    SERVICE REQ 13F0 : ICL operation error
    SERVICE REQ 1411 : Select error
    SERVICE REQ 1412 : Pump life error
    SERVICE REQ 1419 : Pump release error
    SERVICE REQ 141A : Overload error
    SERVICE REQ 141B : Over speed error
    SERVICE REQ 141C : Reversing error
    SERVICE REQ 141D : Driving time-out error
    SERVICE REQ 141E : Velocity deviation error
    SERVICE REQ 141F : Lock error
    SERVICE REQ 1427 : CSIC destination setting error
    SERVICE REQ 1428 : Ink holder Board Assy
    SERVICE REQ 1430 : Holder ink pad error
    SERVICE REQ 1431 : Ink selector life error
    SERVICE REQ 1434 : IC cover unlock error
    SERVICE REQ 1438 : Maintenance tank error
    SERVICE REQ 1439 : Cap error
    SERVICE REQ 143A : Overload error
    SERVICE REQ 143B : Over speed error
    SERVICE REQ 143C : Reversing error
    SERVICE REQ 143D : Driving time-out error
    SERVICE REQ 143E : Velocity deviation error
    SERVICE REQ 143F : Lock error
    SERVICE REQ 144A : Overload error
    SERVICE REQ 144B : Over speed error
    SERVICE REQ 144C : Reversing error
    SERVICE REQ 144D : Driving time-out error
    SERVICE REQ 144E : Velocity deviation error
    SERVICE REQ 144F : Lock error
    SERVICE REQ 1489 : Wiper error
    SERVICE REQ 148A : Overload error
    SERVICE REQ 148B : Over speed error
    SERVICE REQ 148C : Reversing error
    SERVICE REQ 148D : Driving time-out error
    SERVICE REQ 148E : Velocity deviation error
    SERVICE REQ 148F : Lock error
    SERVICE REQ 1494 : Ink selector error
    SERVICE REQ 1496 : Ink selector sensor error detection
    SERVICE REQ 1497 : Switching time-out error
    SERVICE REQ 149D : Driving time-out error
    SERVICE REQ 1501 : Release motor phase detection error
    SERVICE REQ 150C : PG phase detection error
    SERVICE REQ 151A : Overload error
    SERVICE REQ 151B : Over speed error
    SERVICE REQ 151C : Reversing error
    SERVICE REQ 151D : Driving time-out error
    SERVICE REQ 151E : Velocity deviation error
    SERVICE REQ 151F : Lock error
    SERVICE REQ 152A : Overload error
    SERVICE REQ 152B : Over speed error
    SERVICE REQ 152C : Reversing error
    SERVICE REQ 152D : Driving time-out error
    SERVICE REQ 152E : Velocity deviation error
    SERVICE REQ 152F : Lock error
    SERVICE REQ 1530 : Driven roller HP detection error
    SERVICE REQ 1536 : Pressurizing reset error
    SERVICE REQ 1537 : Pressurizing error
    SERVICE REQ 153A : Overload error
    SERVICE REQ 153B : Over speed error
    SERVICE REQ 153C : Reversing error
    SERVICE REQ 153D : Driving time-out error
    SERVICE REQ 153E : Velocity deviation error
    SERVICE REQ 153F : Lock error
    SERVICE REQ 1540 : Cutter HP detection error
    SERVICE REQ 1541 : Cutter return error
    SERVICE REQ 1549 : Motor disconnection error
    SERVICE REQ 154A : Overload error
    SERVICE REQ 154B : Over speed error
    SERVICE REQ 154C : Reversing error
    SERVICE REQ 154D : Driving time-out error
    SERVICE REQ 154E : Velocity deviation error
    SERVICE REQ 154F : Lock error
    SERVICE REQ 1551 : Paper thickness determining error
    SERVICE REQ 1561 : Paper thickness at power-on error
    SERVICE REQ 1800 : AID voltage error
    SERVICE REQ 1A23 : Incorrect RTC data error
    SERVICE REQ 1A26 : RTC Access T/O error
    SERVICE REQ 1A37 : Thermistor error
    SERVICE REQ 1A38 : Transistor environmental temperature error
    SERVICE REQ 1A39 : Head error
    SERVICE REQ 1A40 : IC22 error
    SERVICE REQ 1A41 : Head rank ID input error
    SERVICE REQ 1A50 : I2C Comm error (Between elements on ASIC and MAIN)
    SERVICE REQ 1A51 : I2C Comm error (Between elements on SUB and MAIN)
    SERVICE REQ 1A52 I- : 2C Comm error (Between elements on SUB-B and MAIN)
    SERVICE REQ 1A53 : I2C Comm error (Between elements on SUB-C and MAIN)
    SERVICE REQ 2000 : NVRAM error
    SERVICE REQ 2002 : SDRAM error
    SERVICE REQ 2003 : FLASH BOOT SUM CHECK error
    SERVICE REQ 200A : F/W load error
    SERVICE REQ 200D : System interrupt watchdog time-out error
    SERVICE REQ 200E : Unknown NMI
    SERVICE REQ 2010 : UART communication error
    SERVICE REQ 3000 : AC shut-off
    SERVICE REQ D131 : AID error
    SERVICE REQ FxxX : CPU-related error
    SERVICE REQ DxxX : Debug error

    Spectroproofer and Auto Take-Up error Codes

    D3 : Driving auto take-up system
    D6 : Driving paper pressing system
    65 : Cooling Fan lock detection error
    12 : Paper Pressing Plate Sensor no detection error
    13 : Foreign material detection error in paper pressing
    14 : Paper pressing origin position detection failure error
    15 : CR HP Sensor no detection error
    16 : Paper pressing system abnormal measurement value error
    17 : Take-up system abnormal measurement value error
    20 : Slack Sensor no detection error
    01 : Mechanism is not installed -(Mount Sensor is OFF)
    30 : Driving time-out error
    31 : Overload error
    32 : Over speed error
    33 : Reversing error
    34 : Velocity deviation error
    35 : Lock error
    40 : Driving time-out error
    41 : Overload error
    42 : Over speed error
    43 : Reversing error
    44 : Velocity deviation error
    45 : Lock error
    20 : Driving time-out error

    Votre imprimante EPSON ou le code erreur n'est pas dans cette liste ? Pas de panique, utilisez le formulaire de maintenance accessible en haut de page et précisez votre modèle d'imprimante !